Headset Bearing - 11/8" | IS42/28.6 | OD:41.8 x ID:30.1 x H:8 x A:45°

£8.99 £7.49
In stock
SKU
HB1418
Headset Bearing - 11/8" | OD:41.8 x ID:30.1 x H:8 x A:45°

Headset Bearing - 11/8" | IS42/28.6 | OD:41.8 x ID:30.1 x H:8 x A:45°

High quality cycle industry replacement angular contact bearings for our Edge Integrated Tapered Headsets. These angular contact bearings can also be used as direct replacements on all other makes of headsets that require the same bearing size.

S.H.I.S - IS42/28.6 (Standard Headset Identification System)

Sealed AC Bearing - IS42/28.6 | (OD:41.8 x ID:30.1 x H:8 x A:45°)

Direct replacement for the following bearings:

FSA 870 (MR042, MR070, MR084, MR116, MR121)

TH-870/s (MR042/s) – TH Industries (s=stainless)

TH-870-CB (MR116) – TH Industries (ceramic)

MH-P08 Campag Fit 

If you need this bearing with the recess lip for a Specialized follow this LINK

Replacement bearing for the upper Headset Bearing for the following Specialized Frames:

    • 2009 Carbon Epic / Era / Stumpjumper / Safire
    • 2010 Enduro / Epic / Stumpjumper
    • 2011 Stumpjumper Carbon / Alloy EVO / Alloy 29er
    • 2011 Enduro / Epic
    • 2012 Enduro, Stumpjumper, Epic, Era, Safire
    • 2013 Epic, Camber, Stumpjumper, Safire, Enduro

 

 For the lower bearing for the above frames see here

IS42/28.6

OD:41.8 x ID:30.1 x H:8 x A:45°

© 2017 Edge Sports UK LLP. All Rights Reserved. VAT No. 142 5429 26. Registration No. OC385089